Washing the washer

Washing the washer

Laundry washing is one of the most common household chores. Luckily, the days when the dirty clothes had to be washed by hand are long gone. Today, the clever housewife just lets the annoying task be done by the machine. All you have to do is presort clothing, select the program and then dry it. Of course, it is particularly annoying if you do not remove your freshly laundered laundry from the drum as you hoped, and on top of that also get an unpleasant smell from the clothes.

In such cases, it helps to treat the washing machine thoroughly. Over time, bacteria, deposits of lime and even mold accumulate inside the machine. Therefore, it is no wonder if the laundry smells musty. How to prevent dirt in the machine and how best to clean the machine, we tell you in today's guide. In addition, you will learn which home remedies are ideal for cleaning the machine and which tips you should frequently keep your hands off.

How do dirt accumulate in the washing machine?

The two main causes of dirt in the washing machine and the The resulting odors are clearly obvious to experts:

  1. Permanent washing at low temperature
  2. Use of liquid detergent instead of washing powder

With this type of washing you can save money and, of course, also protect the environment Washing machine in the long run, however, damage. Because of the low temperatures, grease, lint and soap residue are not only stuck in the lint filter, but also in the areas of the washing machines that are not at all visible to you. Often, for example, the area underneath the drum is affected by dirt deposits. But also seals and hoses have residues and start to smell. Some ingredients may not dry completely after use, eventually causing mold to form.

The result: Not only does the laundry smell unpleasant after the wash cycle, but the entire machine smells unpleasant. In addition, the washing machine can break sooner or later in the worst case. The solution is obvious. The existing dirt must be removed by thorough cleaning. In addition, you should consider some instructions for the care of the washing machine, in order to avoid or at least reduce such contamination in the future.

Preventive Measures for the Care of the Washing Machine

Ideally, you should not let it get so far that dirt within the washing machine impaired its functionality. Therefore, we have summarized a few tips for you that will help you avoid deposits and mold in the machine.

Leave the machine door open after washing

Be sure to remember the door of the machine each use a gap wide open. This ensures that the residual moisture can escape from the drum and that the sealing rubber dries well. You can also use a little paper towels and dry the rubber seal after each wash manually to make sure that no mold forms. Also, the filler drawer into which you place the detergent and fabric softener should remain open after each use to allow it to dry out.

Always dispense detergent and conditioner exactly as per the instructions and not according to the motto & quot; Much helps a lot & ldquo; , If too much detergent is added to the filling tray, the washing machine will not be able to flush it completely into the drum and the residues will begin to mold.

Taking these tips into account, make sure that mold spores are not in optimal conditions and stay away from your machine.

Occasionally wash at 95 degrees Celsius

We also recommend washing at least once a month in the higher temperature range , Although modern detergents have a very good effect and remove even at low temperatures most spots, however, germs are not sufficiently killed at 30 or 40 degrees. Therefore, allow the machine to run at 95 degrees Celsius at regular intervals, for example if you want to clean your bed linen or towels. This will remove residues of grease, dirt and soap. Alternatively, you should at least occasionally use a hygiene rinse that also kills germs.

Prevent limescale deposits

Do you live in a region where the water is particularly hard, ie calcareous? Then it is extremely important for you to prevent calcification. Lime in the machine not only prevents your laundry from becoming radiantly clean, it also greatly increases your washing machine. A device that is heavily calcified has a significantly shorter lifetime than lime-free washing machines. For example, the rubber on the door is no longer tight, the pump breaks down or clogs hoses. Therefore, use a special water softener with each wash and remember to descale your washing machine regularly with a commercial descaler from the drugstore.

Basic machine cleaning - how it works

In addition to the preventive measures, we recommend you to use it approx to carry out a basic cleaning of your washing machine for half a year. The best way to do this is as follows:

  1. Wipe the outside of the machine with a damp cloth.
  2. Clean the lint filter.
  3. Thoroughly clean all seals with a damp cloth.
  4. Brushes

How to proceed in detail with the individual work steps is now explained.

Step 1: Clean the washing machine externally

The first measure of the basic cleaning consists of cleaning the machine externally to clean. It's all about eliminating dust. In addition, you should wipe off spilled detergent.

Step 2: Remove foreign matter from the lint filter

Cleaning the lint filter is the most important measure of basic cleaning. The lint filter serves to catch foreign objects so that they can not get inside the machine. A forgotten handkerchief, coins or buttons are kept there until you remove the sieve and remove the foreign matter. If you neglect to clean the lint filter, it will clog over time and lead to serious washing errors.

Open the flap located at the bottom of the baseboard of your machine. Depending on the manufacturer, you can remove the sieve with a lever or a special rotation. When removing the sieve, the machine releases a small amount of water, which should be collected with a flat bowl or a high-suction sponge.

Now you can inspect the sieve for foreign bodies. Not infrequently you will find finds that you have long missed. Rinse the strainer under the tap or dissolve stubborn blockages with the shower head. Now replace the clean lint filter and tighten it to prevent water from spilling on the next wash.

Step 3: Clean the Sealing Rubber

Especially with front loaders, remember to clean the rubber seal regularly. It is located in front of the drum and serves to seal the door so that no water can escape. Naturally, it accumulates moisture there after washing, which dries very hard. As a result, mold quickly develops. Use a damp cloth and soak in a little diluted citric acid. Then rub the rubber with the cloth to remove any deposits. Then carefully dry the rubber seal with kitchen paper.

Step 4: Remove detergent residue from the fill tray

Especially if you are washing with liquid detergent mainly, residues will remain in the fill tray with each wash. Also, the softener is often not completely rinsed, so that form moist deposits that sooner or later begin to mold. If your laundry smells unpleasant and no longer so fresh after washing, this is usually an indication that the drawer must be cleaned again.

The reason: The fine nozzles are clogged by the dirt and the mold, so that Detergents are not washed in properly. In addition, moldy particles enter the wash cycle and cause an unpleasant odor. For cleaning, you can remove the tray:

  • If there is a colored nipple in the back area, simply press it in.
  • Alternatively, apply a little pressure on the rear tray until it lowers, then you will Pull the tray out easily.

Now let the tray fill with water for a while in a bucket. Then brush out stubborn residues with an old toothbrush. It is also important that you allow the tray to dry well after cleaning.

Washing Machine Cleaning - These home remedies have been proven

In addition to the commercial cleaners that you can use to clean your machine, home remedies have proven to be useful. They are often cheaper and better for the environment. For decalcifying, for example, you can use diluted citric acid in addition to a conventional decalcifier.

Time and again, the tip is given to use vinegar or vinegar cleaner to descale and clean the washing machine. However, we advise against it, as the acid is extremely aggressive and may cause the hoses and seals of your machine to decompose and become porous.

Citric acid removes limescale much more gently without affecting the technology of your washing machine. Alternatively, also offers chlorine cleaner. In addition, you can also try to fight the dirt in the washing machine with normal dishwasher tabs. Put two tabs in the drum and then wash at 95 degrees Celsius to decompose the coarsest debris in the machine. If you struggle with really stubborn deposits when cleaning your drawer, you can soak it in denture cleaners. It decomposes the residue, so that your filling tray becomes clean and mold-free again.

Remove Animal Hair, Sand and Soil from the Washing Machine

In addition to the regular basic cleaning, it may happen occasionally that special cleaning is required for certain reasons is. This applies, for example, if animal hair or sand has settled in the machine. However, when it comes to the question of how to remove dog and cat hair from the washing machine or get sand out of the drum, we naturally have the right answers for you.

What do animal hair do in a washing machine?

Animal lovers know the following Problem: By cuddling with the animal roommates hair on the clothes remain, which fall off the laundry during washing and collect in the drum. Now the animal hairs are once removed from the clothing, but then they stick to the shirts and pants of the next wash.

In order to eliminate this phenomenon, it makes sense to leave the machine regularly at a temperature of 95 Celsius degrees. The fat that sticks to the hair of the animals dissolves and the pet hair migrates into the lint. Once the hair has arrived in the sieve, it is no longer a problem to remove the hairballs. This approach will allow you to enjoy clean, dry laundry in the future.

How To Remove Sand From Your Washer

It does not matter if your kids bring home a lot of sand and earth on their clothes while playing outdoors or if their clothes have become gritty on their last beach vacation: sand can be a real washing machine Problem, because it can clog hoses and thus paralyze the entire machine.

Even other coarse dirt such as earth can lead to serious disruptions of the washing machine and should therefore be removed immediately.

To get sand out of the washing machine again , you must first remove the lint filter. Then pick up a flexible brush and bend it at the front end at a 45-degree angle. Guide the brush to the infiltrating hole of the lint filter and thoroughly brush the tubing until the sandy water runs out.

Summary

The cleaning of the washing machine should not be underestimated. With regular measures to prevent and avoid mold, limescale and dirt deposits you contribute to the fact that only rarely a great effort for the cleaning is necessary. For example, do not use only liquid detergent and occasionally wash at high temperature. In addition, we recommend once every six months a thorough cleaning of your washing machine. If you take these tips into account, you will be able to enjoy your machine for a long time.

Artikelbild: © Sander van der Werf / Shutterstock


Search