Kitchen Sink Advisor: Buying, Mounting and Cleaning

Sinks recessed areas in the kitchen counter designed to clean plates, kitchenware and other dishes. These basins are usually made of corrosion-resistant steel, sheet steel, ceramics, stoneware or plastics. Almost all kitchen sinks have overflow holes that can not accidentally overflow water.

Since the kitchen sink is used several times a day in the kitchen, one should not only look for the look, but also for quality and functionality respect, think highly of. The classic among the materials is stainless steel. Both at home and in renowned kitchens, the easy-care material is used. At least as much as enameled kitchen sinks are bought. Here, however, caution is advised because email can flake off hard punches. Practical is the material, as it, as well as rinsing ceramic and plastic, is available in many colors, but at the same time also very robust.

Who has now chosen the material , that is still long not finished, because a sink alone does not do all the work, it still lacks the appropriate drainer . Where should this go? To the left or to the right? This question initially depends on whether the users are left-handed or right-handed. But also the space and the division of the furniture play a crucial role. Basically, however, the drip tray belongs to the edge in order not to unnecessarily restrict the work surface .

The question of the style, ie which fitting fits the existing kitchen equipment, can be easily answered. Consumers just need to know if they prefer to use separate taps for hot and cold water or to work with mixer taps:

  • The two handle faucet of course has the disadvantage of having to work with two hands. In addition, the fact that the water consumption is higher, since the ideal water temperature must be mixed consuming.
  • Single lever allow the simple regulation of water temperature and quantity - all with one hand. This reduces water consumption by 15 to 30 percent. It is recommended to use energy-saving fittings that allow hot and cold water to pass through in the middle position.
  • A sensor water tap can save a particularly large amount of water - up to 70 percent. After only one second, the water stops automatically when the sensor stops registering the hands.

Furthermore, a high spout and a pull-out hand shower facilitates flushing many times.

Installing the kitchen sink in 10 steps

For DIY enthusiasts installing a kitchen sink is no problem if our instructions are followed step by step:

  1. Before any work starts, do-it-yourselfers must close the main water tap and let all pipes run empty
  2. If the old angle valves are used, it is sufficient to close them.
  3. Next, the water inlet and outlet as well as the kitchen sink are dismantled. If the new sink is slightly larger, the cutout of the worktop must be adjusted accordingly.
  4. To adjust the worktop, you have to turn the sink over and place it on top of the worktop, then mark the contours. Some rinses provide templates that make work noticeably easier.
  5. Next, cut the worktop along the cut lines with a jigsaw. It is recommended to start with a hole first.
  6. Now you can apply the cut edges with Silicone or with Sealing Tape
  7. After installing the fitting, drain fitting and water overflow, make sure that the claws are firmly seated in the worktop.
  8. Now mark the hole for the fitting, cut it out with a drill or puncher, and install the fitting with a valve key.
  9. Then fit the connection piece for the water drain and the siphon.
  10. If you would like to use a DHW cylinder , you must have it installed by a qualified electrician. The storage tank requires three connections from a low-pressure fitting, namely an angle valve cold water, cold water inlet and hot water return.

Tip : New kitchen sinks usually have a integrated drainage screen . If this is not available, he can easily buy in the hardware store and retrofit.

4 Tips for cleaning the sink

When cleaning the kitchen sink most people rely on the best possible selection of cleaning agents, which is especially effective for the particular material of the sink. Most sinks are made of stainless steel, but silgranite and ceramics are also becoming more common. Here are some tips to make the sink sparkle.

  1. Stainless steel : Kitchen sinks made of stainless steel are the most common in Germany. The same cleaning tips apply to cleaning them as to other stainless steel items, which means that warm water and some dishwashing detergent are usually sufficient for cleaning. Finally, you only have to wipe dry with a towel. It is important to clean the kitchen sink whenever possible after use, then no limescale can develop.
  2. Remove stains : If all precautions despite defaults still lime, you can use the sink made of real stainless steel thoroughly clean with acidic cleaners. The popular vinegar, which can be used for many purposes, can also help by soaking kitchen paper in vinegar and leave it on the lime scale for about 30 minutes. Then the stain can be wiped with a sponge and rinsed with water. For particularly stubborn stains and stains, use Backnatron, which is applied directly to the stain with a sponge. After a short time, wash thoroughly and rub dry with a clean cloth. Every cleaning should avoid scratching objects such as steel wool or pot sponges, they can damage the sensitive stainless steel.
  3. Insider tip for Siligranit : The granite and acrylic composite material from Silgranit stands out due to its particularly good scratch resistance and stain resistance. Limescale can still arise, but can be relatively easily combat: The power of the lemon or its acid causes miracles. Also recommended is the subsequent use of a heavy-duty detergent to completely clean the kitchen sink. For this purpose, the sink must be soaped extensively, then let the detergent work overnight. The next day, consumers can rinse everything thoroughly. When buying heavy-duty detergents, make sure that it is really the desired product. Mild detergent does not contain the necessary bleach to remove stubborn stains and dirt.
  4. Cleaning ceramic sinks : Ceramic kitchen sinks are the least important because Feinstein products tend to be less sensitive. Nevertheless, it can happen that metal objects leave some streaks or stains due to abrasion. Scouring milk easily removes these impurities.

Artikelbild: © Couperfield / Shutterstock