Rigips plate dimensions

Rigips plate dimensions

For dry interior finishing, plasterboard is usually used. These panels are often used because of their excellent fire protection properties; Plasterboard panels can meet all legal standards. This means that they are considered to be flame retardant and nonflammable. The panels are used for thermal insulation and interior work. They are used everywhere from the roof to the basement.

Rigid panels Dimensions

Rigid panels are available in a range of formats. The plates with a width of 125 cm and a length of 200 cm or 260 cm are the most common. This plate is ideal for use in interior design. You also need very little stand work to support the building structure. In addition, however, other dimensions are sold. Easier to handle are smaller versions with a width of 60 or 90 cm. The thicknesses most commonly used in interior design are 12.5mm and 9.5mm. Which plasterboard dimensions are needed for a project depends on various factors. So it may be that a robust plate with a plate thickness of 18 or 20 mm is needed; or a very thin design with a flexible construction - however, these plates are very rare and mostly have a thickness of 6mm.

A common term for the plates is & quot; one-man plate & quot; - these are the narrow models which Can be worn by a person. They are also easy to transport and assemble.

Rigips panels at the best price

The standard sizes are usually available at the best price. However, this does not automatically mean that they also secure the best price performance ratio. Depending on the project, various plasterboard dimensions are required. If the standard formats lead to a large waste, the savings are literally thrown away. Therefore, it is worth to take a closer look at the offers for various manufacturers and plate sizes. There is real potential for savings here, especially for a large-scale project.

If you are working on a project alone, it is not absolutely necessary to use the one-man panels. These are often quite expensive because they have a special format. With the help of a so-called self-assembly or one-man assembly set, the large panels can be used by one person.

Cost-effective building material

Are the appropriate plasterboard dimensions determined and the building materials are on site during the construction project, then can be quickly and easily Easily draw walls and redesign rooms. Whether it is an attic to be renovated, or the living room needs a room divider, that does not matter - plasterboard is universally applicable. They are easy to assemble and attach to a variety of substructures. The low weight makes it possible, for example, to suspend a ceiling with plasterboard.

The installation of the panels can be done alone. However, depending on the size of the project, it is advisable to work in a team. The mounting of a plasterboard can be divided into five steps:

  1. Cutting the plate
  2. Smoothing the plate
  3. Fixing the plasterboard
  4. Smoothing the seams and edges
  5. Finishing the surface

To clean the plates, is a high quality tool essential. Depending on the chosen procedure, various utensils are important.

  • Saw or Utility Knife
  • Nails or Screws
  • Repairman's Hammer
  • Cordless Drill
  • Sandpaper
  • Spirit Level

Cut to size

Like the name already betrays, the plates are provided with a gypsum core. This is covered on both sides by a stable cardboard layer. This lightweight design makes it possible to cut the panels with a utility knife. Using a guide (wooden board or metal rail), one side of the plate is slashed to the core. It can then be broken with a smooth movement along the incision. The result is a bend line on the back, which can be separated exactly with the utility knife. Of course it is also possible to cut a plasterboard with a jigsaw or a wood saw. The jigsaw is a good choice especially for round cutouts.

In order to get a clean cut with the jigsaw, a puncture hole should be drilled on the cutting line. The saw blade can be inserted neatly there and find a straight cut start.

It is important to work on dirty edges before mounting. This ensures that the plates then make a smooth seam. If the panels are mounted with an unclean seam, they can hardly be smoothed out properly.

Panel mounting

As a rule, a wooden frame is used on which the plasterboard panels are applied. But it is also possible to mount the panels directly on concrete walls or other surfaces. If you attach yourself with nails, a mallet hammer is the best choice for hammering in your nails. This has a rounded head that can sink the nails smoothly in the plate. The nails should be at least 3 cm long and not more than 20 cm apart. An automatic nailer is a real relief.
In addition to the nails also plasterboard screws can be used for assembly. These have a length of 2.5 to 3.5 cm. When mounting, make sure to countersink the screws and not to drill too deep into the plate.

Smooth seams and edges

The assembled panels have inner and outer edges in the corners. The inner edges can be easily smoothed with a sealing tape. Both plates are lubricated on the corresponding side with a sealant. Then the sealing tape is placed over corner in the edge. The excess sealant is then removed with a putty knife. For external edges, the use of a special reinforcing strip offers. This is similar to the sealing tape attached. Aluminum edges can also be applied for extra protection.
Even the smooth seams should be treated with a sealant. Simply lubricate the mass just above the seam. The sealant penetrates into the fine bumps. Then let the compound dry and sand with a sandpaper.

Surface treatment

It should be noted that a plasterboard is not resistant to moisture. The mounting of the plate should therefore leave a small margin to the ground. For this purpose, a piece of the plate can be used as a guide. Simply place the plate to be mounted on the plates lying on the floor and fasten. After mounting, simply remove the guide plate. To get a clean finish, a bottom bar is mounted.
The plasterboard can be painted after painting, decorated with wallpaper or tiles. There are no limits to the imagination here.


Rigips panels are a cheap and reliable building material that is easy to process. For projects in interior design, they are the best choice. The plasterboard dimensions can be adjusted as desired, which provides additional flexibility.

Artikelbild: © holbox / Bigstock.com

Got mysql Error: Disk full (/var/tmp/#sql_5b37_0); waiting for someone to free some space...
in querySELECT a.id, a.id_category, a.id_tag, a.template, a.url, a.h1, a.h2, a.h3, a.stext, a.text, a.img , img_bing FROM en_content a left join en_cat_content tc on (a.id = tc.article_id) where tc.cat_id in ( 11 ) AND a.id <= 1165 group by a.id DESC LIMIT 0, 1