Washing Machine Walks - Cause and Measures

Washing Machine Walks - Cause and Measures

Washing machine owners are often shocked to hear about their device suddenly found the wash cycle in a completely different place. Some people even observe how the machine apparently wanders through the room while washing. But for all worried washer owners, we have good news: When washing machines roam the room, there are no ghosts or supernatural powers in the game, nor is there a serious technical problem. In most cases, the causes are easy to find and quick to fix.

Reasons to Walk the Washer

In principle, it does not matter how old your washing machine already is, because it does not matter when you buy it always start with an unpredictable hike. However, the surprise is certainly great when you turn on the machine, leave the laundry room or bathroom, and find it is not there when you return.

Watch the machine at the next wash. Quickly you will notice that the device moves through the room mainly during the spin cycle.

Washing machines rarely walk during the normal wash cycle. In principle, the imbalance that occurs during washing in the drum is to blame for wandering the machine. After starting the wash cycle, the drum starts to rotate. The individual items of laundry are not always evenly distributed in the drum. As a result, the laundry weight can not be distributed uniformly. Due to the fast rotational movements during spinning, strong centrifugal forces are generated. Thus, the actual weight of the laundry increases up to 7 times. In addition, the laundry soaks up with water, which quickly creates a weight of 100 kilograms, which pushes the entire machine in a certain direction by the imbalance. In this way, the washing machine goes on the hike.

The most common causes of moving washing machines

In most cases, there is no defect, but a simple set-up error. Therefore, you should exclude this cause first, if you have re-installed the device after a move. Often, however, the following components of the washing machine are also involved if the machine moves suddenly:

  • Transport lock
  • Wash drum
  • Water pump
  • Drive motor
  • Compression hoses
  • Control unit
  • Stone slab or concrete slab
  • Height adjustable feet
  • Shock absorbers
  • Springs

These components should therefore be checked to prevent the machine from migrating in the future. The best way to troubleshoot the problem is to use the following tips to get to the bottom of the error.

Step 1: Check the shipping lock

New washing machines have transport locks that are designed to lock the drum or concrete slab to back up. Fixing prevents damage to the washing machine housing during transport. Especially the removal of the transport protection for the concrete slab is forgotten after setting up. However, it serves as a counterweight of the filled laundry drum and must therefore be able to move during the wash cycle. If you have not thought about removing this transport lock, the washing machine will not be able to compensate for the imbalance. As a result, she goes on the hike during the wash, hops or wobbles strongly. Therefore, if your washing machine is new, you should check that all transport locks are removed.

Refer to the instruction manual if you are unsure. There is usually a graphic in which all transport safeguards and the respective positions are marked.

If you can rule out that a forgotten transport lock is to blame for wandering the unit, the search continues for the error.

Step 2: Straighten the Washer

Now, pick up a spirit level to check that your Machine is really absolutely straight. Washing machines must stand straight in all directions so that they do not wander. You can use the adjustable feet to align the device. For some machines, you can only use two feet to adjust the height, while for other machines four feet are height adjustable. If you have a very cheap model with no adjustable feet, you can underlay small woods.

Step 3: Optimize Underground

Sometimes washing machines start to wander even on a sub-optimal surface. This is especially true if the soil is too soft, too hard or too irregular. A non-uniform screed floor can be straightened by placing a stable and massive slab under it. For hard-to-tile floors you will also find special mats made of rubber in the trade.

If you have already laid a rubber mat, hiking may also be due to the fact that this was not designed optimally. Check if there are some washing machine feet next to the mat.

If none of the above is the cause of the migration of your washing machine, then there is probably a technical defect.

Step 4: Washing machine on a mechanical Examine damage

Now is the time to find out if a component inside your device is broken. The following faults are possible, for example:

  • Broken springs
  • Defective shock absorbers
  • Electronic problem (in modern devices with unbalance automatic transmission)
  • Loose V-belt on the motor or on the drum
  • Broken suspension of the drum or Concrete slab

To repair your washing machine, it must be disassembled. If you can not do that yourself, you should ask a service technician for advice.

Conclusion

Mostly there's no fatal error behind hiking a washing machine. If your device has traveled only once, you may have just overloaded the drum. Even large pieces of laundry, such as pillows, comforters, or carpets may cause the machine to move as it flings.

Summary

If a washing machine wanders through the room or skips while spinning, it's because of the Imbalance in the drum. The causes are usually easy to fix. For example, setup errors, an unsuitable underground or forgotten transport safeguards are considered as culprits. In rare cases, however, it can happen that there is a defect in the interior when the machine is moving when spinning.

Artikelbild: © Rashevskyi Viacheslav / Shutterstock


Search